Distinctive front end protection for an unmistakable American classic.
Please select your make, color, year, and quantity. Feel free to call or email us if you have any questions about making your order.
Click to view additional photos.
Click to view additional photos.
HOOD COVER (HDC) Add protection. If we can
protect the leading edge of the hood, and build it to meet the Speed Rating,
then why not? We offer
a Hood Cover that slips right over the leading edge of
the hood (in all factory exterior colors). It attaches to the hood insulation
pins under the hood. This is a great compliment to the Nose Cover for the C5.
Price:
$179.99
Qty
Click to view additional photos.
HEAD REST COVER (HRC) Protect the tops of the seats
from the damaging rays of the sun. Keep the tops of your seats factory fresh.
Add color to the tops of your seats, or match the factory color, or both.
Support your head when you get thrown back into the seat BEFORE you accelerate
and add a driving comfort for the long road trips.
Again, they look very factory and also have that custom appeal. SpeedLingerie
Head Rest Covers simply slip over the top of the existing seat – no modification
required. They are available in ALL factory exterior and interior colors.
Purchase (2) sets to change your “look” from matching exterior color to matching
interior color.
Note: Fits Corvette
factory “Sport Seats” only (the seat with an opening under the head rest area)
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
Price:
$189.99
Qty
Click to view additional photos.
SHIFT BOOT-AUTOMATIC (SBA) Add a splash of color and
style. The shift boot on the center console is ALWAYS black. Now you have
choices. We make
Shift Boots in all factory exterior and interior colors. Remove
the factory black boot and replace it with the SpeedLingerie
Shift Boot –
instructions included. It looks great in combination with the matching Center
Console Cover and E-Brake Cover.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
SHIFT BOOT-MANUAL/6SPEED (SBM) Add a splash of color
and style to your 6-speed too. The shift boot on the center console is ALWAYS
black. We also make
the Shift Boot for the 6-Speed in all factory exterior and
interior colors. Remove the factory black boot and replace it with the SpeedLingerie Shift Boot – instructions included. It looks great in combination
with the matching Center Console Cover and
E-Brake Cover.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
Price:
$79.99
Qty
Click to view additional photos.
DOOR HANDLE COVERS (DHC) Protect the interior door
handle grips from wear and dirt AND add a splash of color. We offer Door Handle
Covers in
ALL factory exterior and interior colors. Easy installation - they
simply wrap over the existing handles with hook &
loop tape. Easy to clean –
simply remove, wipe down, and re-install.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
Price:
$79.99
Qty
Click to view additional photos.
REAR DECK COVER 5-in-1 (RDC) This item offers protection
TIMES FIVE. This one component serves FIVE different functions
1) Rear Deck Cover
– It attaches to the cargo net pins in the truck area and protects the rear top
deck from
scratches/nicks/etc. It also protects the rear fascia from nicks
caused by belt buckles. When finished, simply flip it into
the trunk or over
your luggage so it is ready when you reach inside again. If it’s stored/flipped
over luggage in the trunk, it
also protects the underside of your rear trunk lid
from being nicked/scratched by protruding pieces of luggage.
2) Trunk
Curtain
(convertibles) – We sewed-in a strip of loop tape. You can connect the loop to
the strip of hook tape
that you adhere to the cross-member over the trunk area,
creating a Trunk Curtain. It separates the trunk area from the
convertible top
(in the down position) AND protects the convertible top from luggage stowed in
the trunk area. It also wraps
all the way under the convertible top (in the down
position) to protect the convertible top from luggage stored under the
convertible top.
3) Trunk Mat
– It lays flat on the trunk floor to protect your trunk carpeting from dirty
shoes, golf bags, etc, AND can
be wiped clean. Mud and dirt can be more easily
cleaned from a smooth surface than from carpeting.
4) Door Cover
– Yes, door cover. When you go to the grocery store, you park far away. Still
one car still parks right next
to you. In your garage, you worry that your door
gets nicked by the door of the second car in your garage. See SpeedLingerie.
We
cleverly sewed a cord into the Rear Deck Cover to make it a Door Cover. You just
slip the cord over the raised driver door
window, align the cut-out for the
mirror head, and it protects your door. The Door Cover blends with the car
because it is in
body color. The cord is locked inside the window and cannot be
removed without cutting the cord. PLUS we made the rear
edge longer than your
car door, so if you swing your own door wide you will not chip your door edge on
a wall or another car.
5) Fender Cover
– I know, but we can’t stop. You’re at the gas station and you need to check
your oil but you don’t want
to risk scratching the fender as you reach over it.
Who carries a fender blanket with them? You do. The fasteners sewn into
the Rear
Deck Cover, now Fender Cover, attach to the hood stand-offs (by the wiper and
inside the headlight bucket) in the
engine bay. This also solves the issue of
the standard fender blanket sliding off of the narrow front fender of a Corvette
(we tried to design it to cook and clean too, but this was the limit).
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
Price:
$179.99
Qty
Click to view additional photos.
CENTER CONSOLE COVER (CCC) Added cushion and protection
PLUS added color and style. That C5 is a blast to drive, but on those long road
trips the tip
of your right elbow gets sore, and over time you leave a small dent or wear spot
in your factory center console. Perhaps that
factory lid is already nicked. We have a solution. We offer Center Console
Covers in ALL factory exterior and interior colors
– we even offer two-tone customs (call us). Easy installation – instructions
included. Wraps over the existing lid and uses
factory fasteners for a very factory look.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
Price:
$179.99
Qty
Click to view additional photos.
TRUNK LID
LINER (TLL)
Add a splash of color and protect the inside of your trunk lid from nicks and
scratches. We offer Trunk Lid Liners in
ALL factory exterior and interior
colors. Easy installation - with hook & loop tape. Easy to clean – simply
remove, wipe
down, and re-install.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
Price:
$179.99
Qty
Click to view additional photos.
*REAR NOISE
COVER (RNC) Less noise
and less wind flow from the trunk area, and a more finished look. They also
improve security for those openings
behind the seats that make it easy to reach
into the trunk area, while maintaining access. We offer Rear Noise Covers in
all
factory exterior and interior colors. Each Cover features a color fascia,
semi-rigid frame, sound deadener, and soft rear
panel. It attaches to the inside
lip of the body lid that closes over the convertible top storage area. We even
included a hinged
section in each Cover that allows you to reach your hand under
it to access a wallet or camera stowed in the trunk area. The
hinge also the
Panels to remain in place when the convertible top is moved up or down. This
product works great and features
a very beautiful factory look.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors.
Price:
$179.99
Qty
Note: *C5 Convertible only
Click to view additional photos.
E-BRAKE HANDLE
BOOT/COVER (EBC)
The E-brake boot on the passenger side of the center console is ALWAYS black.
You can change that. We make
E-Brake Covers in all factory exterior and interior
colors. Remove the factory black boot and replace it with the
SpeedLingerie
E-Brake Cover – instructions included. It looks great in combination with the
Center Console Cover
and Shift Boot.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors. Price:
$79.99
Qty
Click to view additional photos.
GRAB BAR HANDLE (GBC)
Highlight your black dashboard by adding a Grab Bar Cover to the passenger side
over the airbag. We build Grab Bar
Covers in all factory exterior and interior
colors. It wraps over the existing bar and attaches using a zipper for a true
skin tight ‘lingerie’ fit. This is a really sharp way to set-apart your
Corvette.
Note: Call us for customs: 2-tone colors, alternate color
stitching, and interior colors. Price:
$79.99
Qty
Click to view additional photos.
Parade Flags
Each Parade Flag Kit contains: (2) 9" x 16"
American flags with flexible white flag poles, black nylon mounting caddies with
mounting hardware, and a set of installation instructions. Life expectancy is
100miles at 60mph. They were designed and developed with precision by a fellow
Corvette owner to proudly display your flags while enhancing the sleek
appearance of your Corvette.
Parade Flags are mounted directly to Corvettes with
the T-Top removed or the Convertible-Top down. Flags are available for
installation in the factory mounts at the top edge of the windshield. Flags are
also available for installation in the rear mounts near the forward edge of the
rear deck. Flags are not available for fixed-roof coupe models, including Z06
models. Price:
$35
Qty
Brackets for NCV In the event that the original
Installation Parts for your SpeedLingerie Products are lost, missing, damaged
and need to be replaced, you can order them here on-line.
In the event that the original Installation
Documents for your SpeedLingerie Products are lost, missing, damaged and need to
be replaced, you can down-load a copy from the "Installation Docs" section here
on-line.
All New SpeedLingerie Products come complete with
Installation Parts. (Brackets, Hardware, and Hook Tape)
There is no need to order Replacement Installation Parts when placing a new
order.
Price:
$18 (add
$10.00/s/h)
Qty
Hardware for NCV
(Required for Gen 1 NCV - old
style with snaps at bottom edge.)
Price:
$10 (add
$5.00/s/h)
Qty
Hook Tape for CCC/RNC/RDC
Price:
$10 (add $5.00/s/h)
Qty
All transactions at this
storefront are protected by secure server software. Your personal and credit
card information cannot be read by anyone else. The security of your order and
personal information are very important to us. If you prefer not to place your
order via the Internet, please call our customer service representatives at
1-800-570-1579 to place your order.
SpeedLingerie.com, Inc. - World's
Finest Automotive Bra
1917 Old Middlefield Way #5 Mountain View, CA 94043 USA